ANSI A234 Alloy Steel WP5 Butt weld Fittings, Alloy Steel Wp9 Elbow, Alloy Steel 3d Pipe Bend, Alloy Steel WP11 Pipe Reducer, Alloy Steel WP22 Equal Tee, Alloy Steel WP91 Pipe Fittings, Alloy Steel Wp5 Elbow, ASME SA234 Chrome Moly Alloy Steel Gr. WP5 Cross Exporter in India.
Trinity Alloys Inc is a known manufacturer, trader and exporter of Alloy Steel WP5 Pipe Fittings, which has good and excellent resistance to oxidation. These Alloy Steel WP5 Elbow Butt Weld Pipe Fittings is approved for service up to 600 Degree F, where its Melting point is 2615 Degree F -2635 Degree F. Our Alloy Steel WP5 Tee Butt Weld Pipe Fittings may perhaps be used in continuous service up to 1140 Degree C provided reducing sulphur gases are not present. These Alloy Steel WP5 Cross Butt Weld Pipe Fittings is used for a variety of processing equipment, particularly to maintain product purity in handling foods, synthetic fibers and alkalis. By means of its high chromium content, our Alloy Steel WP5 Reducer offers good corrosion resistance to increase high temperature properties
Chrome Moly WP5 Pipe Elbow, Supplier of Alloy Steel WP9 45 degree Elbow, ASTM A234 Alloy Steel WP11 Long Stub, Alloy Steel WP22 End Cap, Alloy Steel 5d Pipe Bend, Alloy Steel WP91 Seamless Pipe Fittings, Alloy Steel WP5 Pipe bend Exporter in India.
During outdoors, the rate of attack in these Alloy Steel WP5 Stub End is slow because of the formation of a thin protective film, usually a sulphate. Our Alloy Steel WP5 End Cap Butt Weld Pipe Fittings normally remains bright in indoor atmospheres, where corrosion rates in both marine and rural atmospheres are very low. These Alloy Steel WP5 Seamless Pipe Fittings was a modification of 200 to control carbon which keeps it from being embrittled by inter – granular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes.
Standard Specification For Alloy Steel WP5/9/11/22/91 Buttweld Fittings
| Specifications | ASTM A234 / ASME SA234 |
| Size | 1/8” NB TO 48” NB. |
| Standards | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS |
| Type | Seamless / Welded / Fabricated |
Alloy Steel WP5/9/11/22/91 Buttweld Fittings For Chemical Composition
| Grade | C | Ti | N | Fe | H | O | V | Al |
| Titanium Gr 2 | 0.1 max | 99.2 min | 0.03 max | 0.3 max | 0.015 max | 0.25 max | – | – |
| Titanium Gr 5 | 0.10 max | 90 min | 0.05 max | 0.40 max | 0.015 max | 0.20 max | 3.5-4.5 | 5.5-6.75 max |
Alloy Steel WP5/9/11/22/91 Buttweld Fittings For Mechanical Properties
| Grade | Tensile | Strength (Mpa) | Yield Strength (Mpa) | Elongation % |
| A234 | WP5 | 415–585 | ≥205 | ≥20 |
| A234 | WP9 | 380 min | 585 min | ≥30 |
| A234 | WP11 | 415-585 | ≥205 | ≥20 |
| A234 | WP22 | 415-585 | ≥205 | ≥20 |
| A234 | WP91 | 0.08-0.12 | 0.3-0.6 | 0.2-0.5 |
Types of Alloy Steel WP5/9/11/22/91 Buttweld Fittings
Let’s discuss about your ongoing project
Alloy Steel WP5/9/11/22/91 Buttweld Fittings Packaging
Alloy Steel WP5/9/11/22/91 Buttweld Fitting are individually wrapped by hand to ensure that the high quality of the material is maintained and no damage in the last stages of production. We recommend Plywood cases or pallet packaging to ensure safe packaging and prompt delivery of the ordered consignment. Alloy Steel WP5/9/11/22/91 Buttweld Fitting come with imprints relevant to the job information (eg, heat number, size, material and part number). This information is also printed along all delivered Industrial Buttweld Fittings.
